Snug Wall Bumper

Description

The Snug Wall Bumper has been designed to fit onto our Woburn bed range or similar types of profiling beds produced by other manufactures.

Beds often need to be placed sightly away from the wall due to room fittings and fixtures, which can leave a gap. This can be an entrapment risk, and the Snug Bumper unobtrusively and comfortably fills this space.

This removes the entrapment risk without the need for side rails to be fitted. The easy to fit bumper helps to prevent accidental contact with the wall and is created using soft to the touch material and spacer mesh to prevent the risk of suffocation and increase patient safety.

All the bumpers come with covers that are removable and machine washable, for better infection control.

After fitting the snug wall bumper check that all the brakes on the bed are applied to prevent any movement of the bed when it is being operated.

For more information about Harvest Healthcare please click here

For more news please visit our Twitter

Or follow us on LinkedIn

Cleaning Instructions

Lay the bumper cover down on a flat surface and unzip the pocket to gain access to the internal foam padding. Remove the foam padding. The bumper can now be laundered.
1 Pre wash cold 10 minutes
2 Main wash 80°C 10 minutes
3 Followed by cold rinses and extraction.
Do not use abrasive cleaners, phenol disinfectants, solvents, or alcohol-based cleansers, e.g. Dettol, Phenicol, Hibiscrub, Clearsol, Stericol, Hycoline, as these will damage the cover materials.
Tumble dry at low heat.
Do not iron.
Ensure that the cover is thoroughly dried before inserting the foam and placing the bumper into storage.