Specialist Anti-Entrapment Bumper

CODE: HJB002/HJB003

The Harvest Specialist Anti-Entrapment Bumper, when used in combination with a Woburn/Woburn Community bed, meets standard EN 60601-2-52 and bed standard BS EN 50637:2017 for long-term or domestic environments. These are the stated requirements needed for a bed to be certified for use by either a child or an adult.

Category: Bed Bumpers

Description

The HJB002 Specialist Anti-Entrapment Bumper has been designed to fit onto a Woburn Standard and Woburn Community bed. The HJB003 has been designed to fit onto a Woburn Low and Woburn Community Low.
The product has been designed to provide a safe environment for a junior or a vulnerable small adult who has an adult-sized bed but needs to meet the new safety legislation BSEN50637:2017 for junior beds.

This product conforms to BSEN50637:2017 and EN60601-2-52, making it ideal for long-term care, such as children’s nursing homes and care in a domestic environment. To fully meet this standard, you must also use a separate lock pocket to restrict unwanted access to the handset.

By placing the handset and wires into the lock pocket, they are kept well out of the user’s reach, therefore reducing the risk of ligature. The Specialist Anti-Entrapment bumper prevents access to finger trap zones and allows the occupant to see out, which in turn helps the carer, as they can see through the netting without having to disturb the user.
The Specialist Anti-Entrapment bumper has a recommended user height of 125cm and above.

All the bumpers come with covers that are removable and machine washable, for better infection control.

For more information please visit the Harvest Healthcare website

For news and updates please follow our LinkedIn page

Or browse our Twitter feed

Specifications

As well as fully enclosing the patient through high-visibility black mesh, the bumper and bed combination:

Prevents access to any finger trap zones by the specified 200mm distance or more
Can be used safely in combination with any Harvest Healthcare mattress when using the mattress holders on the bed frame to centralise the mattress
Has no accessible holes between 7mm-25mm diameter
Has no accessible hazardous sharp edges, corners or protruding parts
Passes stability, loading, snagging, entrapment, movement, impact and reliability tests to standard criteria
Has a lockable storage compartment (purchased separately) for the profiling bed handset to prevent access by children orvulnerable adults
Minimum patient height: 125cm
Do not use with a lifting pole

Cleaning Instructions

Lay the bumper cover down on a flat surface and unzip the pocket to gain access to the internal foam padding. Remove the foam padding. The bumper can now be laundered.
1 Pre wash cold 10 minutes
2 Main wash 80°C 10 minutes
3 Followed by cold rinses and extraction.
Do not use abrasive cleaners, phenol disinfectants, solvents, or alcohol-based cleansers, e.g. Dettol, Phenicol, Hibiscrub, Clearsol, Stericol, Hycoline, as these will damage the cover materials.
Tumble dry at low heat.
Do not iron.
Ensure that the cover is thoroughly dried before inserting the foam and placing the bumper into storage.